The document and process conversion
METRIC
measures necessary to comply with
this revision shall be completed by
MIL-PRF-31032/1B
1 May 2005.
29 October 2004
SUPERSEDING
MIL-PRF-31032/1A
22 June 1999
PERFORMANCE SPECIFICATION SHEET
PRINTED WIRING BOARD, RIGID, MULTILAYERED,
THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT BLIND AND
BURIED PLATED THROUGH HOLES, FOR SOLDERED PART MOUNTING
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist
of this specification sheet and MIL-PRF-31032.
1. SCOPE
*
1.1 Scope. This specification covers the generic performance requirements for rigid, multilayered (three or more
conductor layers) printed wiring boards (hereafter designated printed board) with plated holes, that will use soldering
for component/part mounting (see 6.1.1).
*
1.2 Classification. Printed boards are classified as type 3 (rigid multilayer board without blind or buried vias), or
type 4 (rigid multilayer board with blind or buried vias), as specified (see 6.2).
2. APPLICABLE DOCUMENTS
*
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
*
2.2 Government documents. The following specification forms a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
-
Printed Circuit Board/Printed Wiring Board, General Specification for.
*
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
*
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of the documents are those cited in the solicitation or contract.
ASTM INTERNATIONAL (ASTM)
-
Standard Test Methods of Tension Testing of Metallic Foil.
(Application for copies should be addressed to the ASTM International, 100 Barr Harbor Drive, P. O. Box C700,
West Conshohocken, PA 19428-2959 or https://www.astm.org.)
AMSC N/A
FSC 5998
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business