MILPRF50884F
APPENDIX B
B.4 VERIFICATION
B.4.1 Qualification inspection. Manufacturers shall be qualified for listing on QPD-31032 for the technology and
capabilities required to produce printed boards under this appendix.
B.4.2 QML product assurance. The product assurance requirements for the QML level of printed wiring board
furnished under this specification shall be satisfied by certification to MILPRF31032. All printed wiring boards
manufactured and delivered in compliance with this appendix shall be produced in accordance with the approved
quality management plan.
B.4.3 Printed wiring board performance verification. Printed wiring board performance verification inspection shall
consist of inspections on the production printed wiring boards and test coupons specified in the applicable
MILPRF31032 specification sheet. The following details are applicable to the QML product assurance level:
a.
Lot conformance inspection (LCI) product acceptance testing shall be based on the applicable verification
flows (in-process and group A) offered by this document (see A.4.4 and appendix D) or the routine from a
similar technology described by a MILPRF31032 specification sheet. The various verification flows shall
be based upon the design standard used to design the printed wiring boards and the available panel test
coupons for the printed wiring boards.
b.
MILPRF31032 periodic conformance inspection (PCI) program can be used in lieu of groups B and C
inspection of this document.
c.
Test optimization is applicable to this appendix and can be applied to any verification flow detailed in this
document.
B.5 PACKAGING
B.5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these
personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging
requirements are maintained by the Inventory Control Point s packaging activities within the Military Service or
Defense Agency, or within the Military Service s system commands. Packaging data retrieval is available from the
managing Military Department s or Defense Agency s automated packaging files, CDROM products, or by
contacting the responsible packaging activity.
B.6 NOTES
B.6.1 Intended use. This appendix is intended to be used by manufacturers certified to MILPRF31032 and
qualified to MILPRF31032/3 or MILPRF31032/4 to reduce the complexity of maintaining multiple
product/process and testing flows (both MILP50884, MILPRF50884, or MILPRF31032) within a the
manufacturing and testing facility.
B.6.2 Application of the QML product assurance level to existing requirements.
B.6.2.1 Use of existing master drawings. The QML printed wiring board manufacturer can use pre-existing master
drawing and production artwork without any modifications (existing production masters test coupons and requires no
additional or new ones).
B.6.2.2 Form, fit, and function. The form, fit, and function of the printed wiring boards, whether the QML product
assurance level or the QPL/QML product assurance level is used, will be the same.
62
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business