MILPRF50884F
APPENDIX B
PRODUCT ASSURANCE (PERFORMANCE AND VERIFICATION) REQUIREMENTS
FOR QUALIFIED MANUFACTURER LIST LEVEL
B.1 SCOPE
B.1.1 Scope. This appendix contains optional requirements concerning the QML product assurance level for
printed wiring boards covered by this specification. This appendix is a mandatory part of this specification when the
product assurance requirements of appendix A are not used. The information contained herein is intended for
compliance when the product assurance requirements of appendix A are not used.
B.2 APPLICABLE DOCUMENTS
B.2.1 General. The documents listed in this section are specified in sections B.3 and B.4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections B.3 and B.4 of this
specification, whether or not they are listed.
B.2.2 Government documents.
B.2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
Printed Circuit Board/Printed Wiring Board, General Specification for.
(Copies of these documents are available online at https://quicksearch.dla.mil.)
B.2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the
text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
B.3 REQUIREMENTS
B.3.1 Performance requirements. The performance requirements of the applicable MILPRF31032
specification sheet shall apply to all printed wiring boards procured to the QML product assurance level.
B.3.2 Accept/reject criteria. The accept/reject criteria of the applicable MILPRF31032 specification sheet shall
apply to all printed wiring boards procured to the QML product assurance level.
B.3.3 QML brand. At the option of the manufacturer, the QML brand specified in MILPRF31032 may be
placed on printed wiring boards that comply with the product assurance requirements of this appendix.
61
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business