MILPRF50884F
APPENDIX A
e.
Title, number, revision letter (with any notice number when applicable), and date of the applicable design
standard (see A.3.3).
f.
Part identification (if applicable), and marking instructions including size, location, and application method
g.
Whether microsectioned printed wiring board test specimens, sample units or photographs are required to
be delivered with the order.
A.6.2.2 Additional acquisition requirements. Acquisition documents should also specify the following data, if
applicable:
a.
Verification Conformance Inspection option (if other than option 4) (see appendix D).
b.
Design related, if different than the applicable design standard (see appendix D).
(1)
Minimum annular ring (external or internal) (see A.3.1.1), if different than the applicable design
standard.
(2)
Minimum conductor width (see A.3.1.1), if different than the applicable design standard.
(3)
Minimum conductor spacing (see A.3.1.1), if different than the applicable design standard.
(4)
Minimum dielectric thickness (see A.3.1.1), if different than the applicable design standard.
Minimum edge spacing requirement (see A.3.1.1), if different than the applicable design standard.
(5)
(6)
Copper plating thickness (see A.3.1.1), if different than the applicable design standard.
(7)
Conductor finish plating (see A.3.1.1), if other than solder coating or tin-lead.
c.
Level of ionic contamination (see A.3.7.3.1).
d.
e.
Surface peel strength (foil lamination), if applicable (see A.3.7.4.11).
f.
Non-delivery of sample units which have not been subjected to electrical testing (continuity and circuit shorts
tests) and have passed all other tests to groups A and B inspection.
g.
h.
If special, or other identification, marking is required (see A.3.8).
A.6.3 Qualification.
A.6.3.1 Transference of qualification. Manufacturers currently qualified to MILP50884D will have their
qualification transferred to this document. The expiration date of their current qualification will not be changed.
Qualifications in process (before the date of this document) will be performed to the specification revision and
amendment listed on the approved DLA Land and Maratime Form 19W. New applications for qualification (after the
date of this document) will be performed to the requirements of this revision.
55
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business