MILPRF50884F
APPENDIX E
QUALIFICATION REQUIREMENTS
FOR ALL LEVELS OF PRODUCT ASSURANCE
E.1 SCOPE
E.1.1 Scope. This appendix contains the qualification requirements for all levels of product assurance of printed
wiring boards covered by this specification. The process for extending qualification is also outlined herein. This
appendix is a mandatory part of this specification. The information contained herein is intended for compliance.
E.2 APPLICABLE DOCUMENTS
E.2.1 General. The documents listed in this section are specified in sections E.3 and B.4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections E.3 and E.4 of this
specification, whether or not they are listed.
E.2.2 Government documents.
E.2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
Printed Circuit Board/Printed Wiring Board, General Specification for.
Printed Wiring Board, Flexible, Single and Double Layer, With or Without Plated
Holes, With or Without Stiffeners, for Soldered Part Mounting.
Printed Wiring Board, Rigid-Flex or Flexible, Multilayer, with Plated Holes, with or
Without Stiffeners, for Soldered Part Mounting.
(Copies of these documents are available online at https://quicksearch.dla.mil.)
E.2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the
text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
E.3 REQUIREMENTS
E.3.1 Qualification inspection. Qualification testing shall be performed on suitable test vehicles in accordance
with the qualifying activity approved MILPRF31032 qualification test plan.
E.3.1.1 Expiration of qualification. Manufacturers already qualified to the QPL level of this document will retain that
listing until it expires. The 3 year expiration time will not apply to any qualifications performed to this appendix.
E.3.1.2 Requalification. Products qualified in accordance with this appendix shall be monitored and maintained
through the manufacturer s Capability Verification Inspection program and do not require requalifiication to this
specification.
77
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business