MIL-DTL-62738A(AT)
(Application for copies should be addressed to the American National Standards Institute
(ANSI), 11 West 42nd Street, New York, NY 10036.)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.1.1.
3.2 Design, materials, and manufacturing processes. Design, materials, and
manufacturing process selection shall be as specified herein and in applicable referenced
specifications, standards, and drawings. Materials shall be uniform and free from imperfections or
defects which affect their performance and serviceability. All metallic parts shall be made from
corrosion-resistant metals or treated with corrosion-resistant materials. Asbestos and cadmium
materials shall not be used in any form in any part of the PWA. No item, part or assembly shall
contain radioactive materials in which the specific activity is greater than 0.002 microcuries per
gram or activity per item equals or exceeds 0.01 microcuries.
3.2.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
3.3 Operating requirements. The PWA shall meet the following performance
requirements:
3.3.1 Input power. The PWA shall require not more than the current specified in table I.
TABLE I. Input power.
Source
Voltages
Current
E6
24 Vdc 1/
84 mA 2/ 3/
E7
5 Vdc
32 mA 4/
1/ Vdc = volts direct current.
2/ mA = milliampere.
3/ E8 = open circuit.
4/ E8 = grounded.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business