MIL-DTL-62738A(AT)
3.6.2 Fungus. All nonmetallic materials that are not inherently fungistatic shall function in
a fungus environment without adversely affecting the operation/performance of the PWA.
3.6.3 Shock. The PWA shall evidence no degradation of function and meet the
requirements of 3.3 when subjected to the shock test.
3.6.4 Vibration. The PWA shall evidence no degradation of function and meet the
requirements of 3.3 when subjected to the vibration test.
3.6.5 Burn-in. Unless otherwise specified (see 6.2), the PWA shall be subjected to and
pass a "power on" burn-in prior to the inspections listed in 4.1.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.1.1).
b. Conformance inspection (CI) (see 4.1.2).
4.1.1 First article inspection. Unless otherwise specified (see 6.2), the Government shall
select one PWA produced under the production contract for first article inspection. First article
sample shall include all the verifications listed in table II.
4.1.2 CI 100% inspection. CI shall be conducted on all items (100% inspection), and
shall include those examinations and tests from table II as specified in the contract.
4.2 Verification methods. Acceptable verification methods included in this section are
visual inspection, and measurement, sample tests, full-scale demonstration tests, simulation,
modeling, engineering evaluation, component properties analysis, and similarity to previously-
approved or previously-qualified designs.
4.2.1 Verification alternatives. The manufacturer may propose alternative test methods,
techniques, or equipment, including the application of statistical process control, tool control, or
cost effective sampling procedures to verify performance. See the contract for alternatives that
replace verification methods required by this specification.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business