INCH-POUND
MIL-DTL-62741A(AT)
23 January 1998
SUPERSEDING
MIL-P-62741(AT)
16 March 1992
DETAIL SPECIFICATION
PRINTED WIRING ASSEMBLY, MUX/ADCON
This specification is approved for use by the U.S. Army Tank-automotive and Armaments
Command, Department of the Army, and is available for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the Multiplex/Analog to Digital Converter
(Mux/ADCON) Printed Wiring Assembly, referred to herein as the PWA. This is one of the six
printed wiring assemblies that comprise the Simplified Test Equipment/Internal Combustion
Engine-Repregrammable (STE/ICE-R) Vehicle Test Meter (VTM) (see Drawing 12259265).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirement documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document, or by letter.
AMSC N/A
FSC 5998
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business