MIL-PRF-31032/1B
*
IPC - ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES (IPC)
-
Solderability Tests for Printed Boards.
-
Generic Standard on Printed Board Design.
-
Sectional Design Standard for Rigid Organic Printed Boards.
-
Test Methods Manual.
*
(Application for copies should be addressed to the IPC - Association Connecting Electronics Industry, 3000
Lakeside Drive, Suite 309 S, Bannockburn, IL 60015-1249 or https://www.ipc.org.)
(Non-Government standards and other publications are normally available from the organizations that prepare or
distribute the documents. These documents also may be available in or through libraries or other informational
services.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Printed board detail requirements. Printed boards delivered under this specification shall be in accordance with
the requirements as specified herein, and documented in the printed board procurement documentation.
3.1.1 Conflicting requirements. The order of precedence of conflicting requirements shall be in accordance with
3.1.2 Reference to printed board procurement documentation. For the purposes of this specification, when the
term "specified" is used without additional reference to a specific location or document, the intended reference shall
be to the applicable printed board procurement documentation.
3.2 Qualification. Printed boards furnished under this specification shall be technologies that are manufactured by
a manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before
contract award (see 4.2 and 6.3).
*
3.3 Design (see 3.1 and 6.2). Printed boards shall be of the design specified. Unless otherwise noted herein, if
individual design parameters are not specified in the printed board procurement documentation, then the baseline
design parameters shall be as specified in IPC-2221 and IPC-2222, type 3 or type 4, performance class 3. Test
coupons shall be as specified in the applicable design standard and shall reflect worst-case design conditions of the
printed boards that they represent.
*
3.4 Printed board materials. All materials used in the construction of compliant printed boards shall comply with
the applicable specifications referenced in the printed board procurement documentation. If materials used in the
production of printed boards are not specified, then it is the manufacturer's responsibility to use materials which will
meet the performance requirements of this specification sheet. Acceptance or approval of any printed board material
shall not be construed as a guarantee of the acceptance of the completed printed board.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business