MIL-PRF-55110 Printed Wiring Board, Rigid, General Specification ForThis specification establishes the performance and qualification requirements for rigid single??sided, double??sided, and multilayered printed wiring boards with or without plated through holes \(see 6.1\). Verification is accomplished through the use of one of two methods of product assurance \(QPL or QPL/QML\). Detail requirements, specific characteristics, and other provisions which are sensitive to the particular intended use are specified in the applicable master drawing.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL�PRF�55110G

APPENDIX B

Appendix B appendix B B

OPTIONAL QPL/QML PRODUCT ASSURANCE REQUIREMENTS

FOR QUALIFIED MANUFACTURER LIST PROGRAMS

B.1

B.1. SCOPE

B.1.1

B.1.1 Scope. This appendix contains optional requirements concerning the QPL/QML product assurance level

for printed wiring boards covered by this specification. The process for extending qualification is also outlined

herein. This appendix is a mandatory part of the specification when the QPL product assurance level of appendix A

is not implemented. The information contained herein is intended for compliance. This appendix can be used only

by manufacturers certified and qualified for listing on QML-31032.

B.2

B.2. APPLICABLE DOCUMENTS

B.2.1

B.2.1 General. The documents listed in this section are specified in sections B.3, B.4, or B.5 of this specification.

This section does not include documents cited in other sections of this specification or recommended for additional

information or as examples. While every effort has been made to ensure the completeness of this list, document

users are cautioned that they must meet all specified requirements of documents cited in sections B.3, B.4, or B.5 of

this specification, whether or not they are listed.

B.2.2

B.2.2 Government documents.

B.2.2.1

B.2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a

part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract.

MIL-PRF-31032

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-31032

�

Printed Circuit Board/Printed Wiring Board, General Specification for.

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or

https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,

Philadelphia, PA 19111�5094.)

B.2.3

B.2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited

herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable

laws and regulations unless a specific exemption has been obtained.

B.3

B.3. REQUIREMENTS

B.3.1

B.3.1 Performance requirements. The performance requirements of the applicable MIL-PRF-31032 specification

sheet shall apply to all printed wiring boards procured to the QPL/QML product assurance level.

B.3.2

B.3.2 Accept/reject criteria. The accept/reject criteria of the applicable MIL-PRF-31032 specification sheet shall

apply to all printed wiring boards procured to the QPL/QML product assurance level.

B.3.3

B.3.3 QML brand. At the option of the manufacturer, the QML brand specified in MIL-PRF-31032 may be placed

on printed wiring boards that comply with the product assurance requirements of this appendix.