MILPRF55110G
APPENDIX B
B.5
B.5. PACKAGING
B.5.1
B.5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see A.6.2). When actual packaging of materiel is to be performed by DoD or in house personnel, these
personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging activity within the Military Service or Defense
Agency, or within the Military Service's system commands. Packaging data retrieval is available from the managing
Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the
responsible packaging activity.
B.6
B.6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
B.6.1
B.6.1 Intended use. This appendix is intended to be used by manufacturers certified to MIL-PRF-31032 to reduce
the complexity of maintaining multiple product/process and testing flows (both MIL-PRF-55110 or MIL-PRF-31032)
within a the manufacturing and testing facility.
B.6.2
B.6.2 Application of the QPL/QML product assurance level to existing requirements.
B.6.2.1
B.6.2.1 Use of existing master drawings. The QPL/QML printed wiring board manufacturer can use pre-existing
master drawing and production artwork without any modifications (existing production masters test coupons and
requires no additional or new ones).
B.6.2.2
B.6.2.2 Form, fit, and function. The form, fit, and function of the printed wiring boards, whether the QPL/QML
product assurance level or the QPL product assurance level is used, will be the same.
B.6.2.3
B.6.2.3 Certification. The printed wiring boards can be certified as being compliant to this specification
(MIL-PRF-55110).
B.6.3
B.6.3 Benefits of the QPL/QML product assurance level. Printed wiring boards produced by QML manufacturers
using the provisions of this appendix in lieu of previous revisions would be compliant to this specification
(MIL-PRF-55110) in accordance with the QPL/QML product assurance level with the added benefits as follows:
a.
The QPL/QML manufacturer can use pre-existing master drawing and production artwork without any
modifications needed (can use existing production masters test coupons and requires no additional or new
ones).
b.
The printed wiring boards, whether the QPL/QML option or the QPL option is used, will be the same.
c.
The level of quality will be the same or higher than the QPL product assurance level.
d.
When using the correct verification test (for the design), the cost should be the same or less due to
enhancements made to accept/reject criteria.
e.
Customers will be more confident that a QPL/QML manufacturer has demonstrated the capabilities to build
its' design dues to its QML certification and qualification rather the generic standardized qualification test
vehicle of the QPL quality assurance level portion of this document.
55
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business