MILPRF50884F
2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the
text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 General requirements. The manufacturer of printed wiring boards, in compliance with this specification, shall
use, or have access to production and verification facilities adequate to assure successful compliance with the
provisions of this specification and the associated master drawing. Adequacy of a printed wiring board manufacturer
to meet the requirements of this specification shall be determined by the Government qualifying activity (DLA Land
and Maritime, code VQE). Only printed wiring boards which are verified and meet all the applicable performance
requirements herein and the design, construction, and material requirements of the associated master drawing shall
be certified as compliant and delivered.
3.1.1 Master drawing. Printed wiring boards delivered under this specification shall be of the material, design, and
construction specified on the applicable master drawing.
3.1.2 Conflicting requirements. In the event of conflict between the requirements of this specification and other
requirements of the applicable master drawing, the precedence in which documents shall govern, in descending
order, is as follows:
The applicable master drawing (see 3.1.1). Additional acquisition requirements (see 6.2) may be provided in
a.
the order or contract. Any deletion of any of the performance requirements or performance verifications of
this specification not approved by the qualifying activity, will result in the printed wiring board being deemed
noncompliant with this specification.
b.
This specification.
c.
d.
Specifications, standards, and other documents referenced in section 2.
3.1.3 Terms and definitions. The definitions for all terms used herein shall be as specified in IPCT50 and those
3.2 Qualification. Printed wiring boards furnished under this specification shall be products that are authorized by
the qualifying activity for listing on the applicable Qualified Products List (QPL) at the time of award of contract (see
A.4.5, B.4.1, E.3.1, and 6.3). The qualification requirements shall be in accordance with appendix E. Products
qualified in accordance with appendix E are monitored and maintained through the manufacturer s Capability
Verification Inspection program and do not require requalifiication to this specification.
3.3 Product assurance requirements. This document contains two different methods of product assurance for
printed wiring board compliance. The two levels of printed wiring product assurance are QPL (see 3.3.1) and QML
(see 3.3.2) as defined herein.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business