INCH-POUND
MIL-DTL-62739A(AT)
23 January 1998
SUPERSEDING
MIL-P-62739(AT)
16 March 1992
DETAIL SPECIFICATION
PRINTED WIRING ASSEMBLY, CLOCK/DISPLAY DRIVER
This specification is approved for use by the U.S. Army Tank-automotive
and Armaments Command, Department of the Army, and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a Clock/Display Driver Printed Wiring Assembly
referred to herein as the PWA. This is one of six printed wiring assemblies which comprise the
Simplified Test Equipment/Internal Combustion Engine-Reprogrammable (STE/ICE-R) Vehicle
Test Meter (VTM) (see Drawing 12259265).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirement documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which
may be of use in improving this document should be addressed to: U.S. Army Tank-automotive
and Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using
the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of
this document, or by letter.
AMSC N/A
FSC 5998
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business